How to Draw a Pet Raptor


How to Draw a Pet Raptor 2

How to Draw a Pet Raptor 3

How to Draw a Pet Raptor 4

How to Draw a Pet Raptor 5

How to Draw a Pet Raptor 6

How to Draw a Pet Raptor 7

How to Draw a Pet Raptor 8

How to Draw a Pet Raptor 9

How to Draw a Pet Raptor 10

How to Draw a Pet Raptor 11

How to Draw a Pet Raptor 12

How to Draw a Pet Raptor 13

How to Draw a Pet Raptor 14

How to Draw a Pet Raptor 15

How to Draw a Pet Raptor 16

How to Draw a Pet Raptor 17

How to Draw a Pet Raptor 18

How to Draw a Pet Raptor 19

How to Draw a Pet Raptor 20

How to Draw a Pet Raptor 21

How to Draw a Pet Raptor 22

How to Draw a Pet Raptor 23

How to Draw a Pet Raptor 24

How to Draw a Pet Raptor 25

How to Draw a Pet Raptor 26

How to Draw a Pet Raptor 27
STEP 1. Let's begin the guide drawing with a round shape for the head with a flat edge on the front. Another round shape will be the body.   STEP 2. The oval overlapping the body is the hip and upper leg. Beneath that, the triangle shape acts as the foot and lower leg. Back up at the head, draw a curve for the front of the neck, and a diagonal line at a sharp angle for the back of the neck.   STEP 3. Draw small curves for the middle portion of the leg. Then add triangles for the two outer claws.   STEP 4. The ovals on the body are the shoulder blades. From there we can draw stick arms bent in an L shape. Draw a circle for each hand, and add an S-curve for the tail.   STEP 5. Just to tighten things up a bit, let's complete the back edge of the arms and add some claws. A zigzag works for the mouth.   STEP 6. At this point, you have the option of adding some armor to the drawing. If you want to do that, I suggest skipping to Step 19. Once the armor is complete, you can return to this step and draw the raptor details around the armor. For those sticking with a naked ratpr, lighten the guide drawing, and we'll begin the final line art with the eye and eyebrow. Use sharp curves to give the eyebrow an angry, wild look.   STEP 7. Draw an S-curve for the lower eyelid. Above the eye, draw one back-and-forth curve, like an upside-down V. Behind that, tiny curves copy a portion of that first shape and create a scale ridge around the eye socket. We can start outlining the top of the head now, and outline the opposite eyebrow.   STEP 8. For this raptor, let's draw a V curve to give him a beak for the front of his nose and mouth. From the tip of the beak, draw a curvy center line over the back of the head. Next we can add detail to the zigzag of the mouth, drawing sharp teeth going in both directions.   STEP 9. Next draw the lower jaw, with a point at the chin. Another point can be drawn for the cheekbone. Beneath the jaw, we can reinforce the V shapes of the inner neck.   STEP 10. Draw overlapping curves from the back of the head to build the rest of the neck. Use large curves for the outline of the shoulder blade and shoulder. Leave part of the shoulder blade area open, so it looks like part of the rest of the body. Finally, we can draw a curve for the chest, connecting these shapes together.   STEP 11. Now we'll just draw a pair of cartoony arms, much like regular human arms.   STEP 12. Each hand has three long fingers, curved downward with claws at the ends.   STEP 13. One final curve completes the neck, as we transition to the back of the body. Break up this curve a bit, but pick it up again to draw the center ridge of the tail. Below, we'll use open curves to outline the hip, thigh and knee.   STEP 14. Close in the back of the body. Add a large wrinkle in the skin above the hip. Then we can start working on the lower leg. Below the knee, the leg starts to move away from us. At the next joint, the lower leg bends forward again. The entire leg from this angle is like three overlapping sausages. At the bottom of each section there's a round curve, but we leave it open to have everything look like one piece.   STEP 15. The center toe has a large, retractable claw. Because of its side, this toe is bent backward and the overall shape is like an S. From this angle, we can see the side and bottom of the claw and toe.   STEP 16. The outer toes have a round pad, and the claw comes out from on top of that. On the top of the foot and lower leg, draw a series of horizontal bars for scaly armor plates. For the opposite leg, let's draw a simplified shape. We don't want too many details to compete with the fingers and arms. This area could get messy very easily.   STEP 17. Draw more fleshy wrinkles on the back of the hip. Next use overlapping C-curves to build the bottom of the tail as it curves around. On the opposite side, one S-curve helps to show the bend of the tail. From there, smaller and smaller C-curves can be used to finish it off.   STEP 18. Here's the finished line art for the Pet Raptor. Pretty cute, right? Don't go away, though. There's more!   STEP 19. If you wish, we can add some armor to this guy. Lighten up your drawing or use a tracing paper or vellum overlay. We'll draw simple shapes for arm guards and armor plates on the hips. The helmet will be a bit more complex. First draw a line from the eyebrow, around the eye, and then to the back of the head. On the nose, three curves can give us a sharp horn or spike.   STEP 20. On the head, close in the eyebrow shape, making it very rectangular. Draw two curves below the eye. From there, we're mostly outlining the head again, but with simpler, smoother curve this time for a man-made feel. The armor plates on the back and tail curve around the body like lines going around a bottle of soda. Grab a bottle or tube shape and either draw lines or use rubber bands to get that line all the way around. Then tilt the object to see how the lines turn into deep curves. This will help you figure out how to lay in those armor plates.   STEP 21. After the major shapes are drawn, we can start adding some panel lines for added detail.   STEP 22. Next we'll add some jagged shapes for feathers. The shapes are mainly diamonds and triangles, with little V notches cut out of the sides.   STEP 23. Add some more large feathers behind the first ones, and then use thin curves to add detail and texture.   STEP 24. Now you can go in and add patterns in whatever design you like.   STEP 25. And with that, the line art is complete, and this sucker is ready for battle!   STEP 26. Here's the colored naked raptor. Scroll up for the armored version. Whether you use art markers, paints or digital software to color your creatures, it gives you the option of adding skin patterns, scales and texture without mucking up the drawing with too many lines. With watercolors, thinned acrylic paints or markers, you want to work light-to-dark... though with opaque paints like arylics and gouache, you can add some highlights after the midtones are laid down.... And with that, I conclude the Pet Raptor tutorial. I have a feeling this guy will make a return in a future tutorial, so keep an eye out for that. Thanks for viewing!   Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. Step 7. Step 8. Step 9. Step 10. Step 11. Step 12. Step 13. Step 14. Step 15. Step 16. Step 17. Step 18. Step 19. Step 20. Step 21. Step 22. Step 23. Step 24. Step 25. Step 26.